|
Indicator Controls Corp signal open.
|
Here you see the three Dialight LED modules. They are all the same design on the back, and Would NOT fit in the signal at first.
I had to cut some of the inside stuff to make them fit.
Red was bought on ebay, Yellow was given to me by a linemen, Green I found with my Mcain signal (wasn't in it) and the other green New Dialight Design module.
At least I have a matching set for this signal, and it is gonna stay in this signal, making this an LED signal. The other two are incandescent while this one is LED.
|
|
And the green module I got from Ebay is different then any other Dialight too, the back is designed differently. Especially from these ones or the new design ones.
I wonder where I can get a three set of the crosshatch pattern of Dialight modules.
I remember this process in NYC, when they changed all the reds but left the other 2 colors....then like a few years later the greens were changed out but yellows stayed.....but now they are all LEDs....
Also designs always change!
And this signal wasn't this way before, this signal came with three pixelated LED's, the red a different brand, and what you said explains why the red module was Ecolux while the others were General Electric.
I bought the red module in this from ebay, I got the yellow module from the contractor, and I found the green module with my McCain signal (not IN it).
The red says it's dated 2001 while the other two are 05 I think...