Author Topic: Trying to explode an old burned out T8 36W Fluorescent tube. (Read 15540 times)

elektro666tech · « **on:** April 24, 2011, 11:45:22 AM »

Hello everyone

As everybody knows I really don't like T8 fluorescent tubes, because they nearly totally replaced T12 fluorescent tubes in my country. A few days ago when I was bored I try to destroy a few old burned out T8 fluorescent tubes overdriving them on 4 ballasts with summary power 1,6 kiloWatts. To start them on this setup I use 9kV ignitor SE15/7U made by BAG Turgi which is able to start even very burned out fluorescent tube

Here is video which shows this experiment http://www.youtube.com/watch?v=6IwCvfwwl28
Unfortunately the tube did not explode, does you have any ideas how to force it to explode ?

Medved · « **Reply #1 on:** April 26, 2011, 01:29:07 PM »

Fluorescent is a vacuum device, so it would not EXPLODE.
Heavy overload would at first overload the electrodes, witch then crack their glass stern. Consequently the air would leak in and so the arc would extinguish, so the show end...

RCM · « **Reply #2 on:** April 26, 2011, 06:42:16 PM »

Take one end off and sticky dynamite in it?

A_lights · « **Reply #3 on:** May 04, 2011, 08:28:57 PM »

im guessing the lamp cycled because of excessive mercury pressure due to being overdriven ?

Medved · « **Reply #4 on:** May 15, 2011, 12:00:53 AM »

I don't think so, if it extinguish the arc, it s because of spent electrode coat...

Author Topic: Trying to explode an old burned out T8 36W Fluorescent tube. (Read 15540 times)

elektro666tech

Trying to explode an old burned out T8 36W Fluorescent tube.

Medved

Re: Trying to explode an old burned out T8 36W Fluorescent tube.

RCM

Re: Trying to explode an old burned out T8 36W Fluorescent tube.

A_lights

Re: Trying to explode an old burned out T8 36W Fluorescent tube.

Medved

Re: Trying to explode an old burned out T8 36W Fluorescent tube.


HOME GALLERY HELP SEARCH FORUM LOGIN REGISTER
Login with username, password and session length